2: The Cutting Tool Criteria for selecting a tool
3: Preparation Setup and calculation of feeds and speeds
4: Locating the Groove Offset methods
9: Radius or Chamfer the Groove
10: Parting off a part
|
|||||||||||
| Grooving on the Lathe | |||||||||||
| |
|||||||||||
| WARNING: Machine tools present a safety hazard. Improper operation can result in severe injury. These topics are for non-laboratory study only and are not to be used in conjunction with the operation of any tool or machine described herein. Never use a machine tool without the supervision of a qualified instructor. | |||||||||||
| 1: Overview Types and uses of grooves
2: The Cutting Tool Criteria for selecting a tool 3: Preparation Setup and calculation of feeds and speeds 4: Locating the Groove Offset methods 9: Radius or Chamfer the Groove 10: Parting off a part |
|||||||||||
