Brazed Carbide Tool Bits - 7: Style F
FR and FL styles are used primarily on turret lathes for straddle facing but can also be used for many custom tasks on a conventional lathe.
end mills, lathe bits, c'sinks, c'bores, taps, reamers
|
||||||||||||||
|
Brazed Carbide Tool Bits - 7: Style F
|
||||||||||||||
| WARNING: Machine tools present a safety hazard. Improper operation can result in severe injury. These topics are for non-laboratory study only and are not to be used in conjunction with the operation of any tool or machine described herein. Never use a machine tool without the supervision of a qualified instructor. | ||||||||||||||
|
FR and FL styles are used primarily on turret lathes for straddle facing but can also be used for many custom tasks on a conventional lathe. |
||||||||||||||
|
||||||||||||||
| The FR shown here is used to reach inside the chuck to make a cut | ||||||||||||||
|
end mills, lathe bits, c'sinks, c'bores, taps, reamers
|
||||||||||||||
|
||||||||||||||